TM 5-3800-205-23-1
UNIT PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0010 00
Table 8. Unit Preventive Maintenance Checks and
Services (PMCS) for 613CWD Water Distributor - Continued.
LOCATION
ITEM TO
ITEM
MAN-
CHECK/
NOT FULLY MISSION
NO.
INTERVAL
HOURS
SERVICE
PROCEDURE
CAPABLE IF:
NOTE
1
Initial 250
Transmis-
Hours
sion
Transmission oil filter should be replaced after initial 250
hours of operation of a new or reconditioned machine.
Replace transmission oil filter (WP
tioned.
0.5 Hours Front Axle
Check level of oil in each wheel end
2
250 Hours
final drive:
or Semi-
Final Drives
annual
a. Position front wheels with plug on
center line with front axle.
b. Clean area around plug.
c. Remove plug.
d. Maintain oil level to plug opening.
If level is low, add gear lubricating
oil (Item 21, 22 or 23, WP 0171
e. Clean plug and install.
PLUG
0.2 Hours Front Axle
Level check of oil in front axle differ-
3
250 Hours
Differential
ential:
or Semi-
annual
a. Clean area around level/fill plug,
located on front face of differential.
b. Remove level/fill plug.
0010 00-43
