TM 5-3800-205-23-1
TRANSMISSION OIL FILTER AND OIL FILTER BASE REPLACEMENT
THIS WORK PACKAGE COVERS
Oil Filter: Removal, Installation
Oil Filter Base: Removal, Installation
INITIAL SETUP
References
Maintenance Level
Unit
Tools and Special Tools
Tool kit, general mechanic's (Item 33, WP 0172
Equipment Condition
Shop equipment, common no. 1 (Item 24, WP
Machine parked on hard, level surface (TM 5-3800-
205-10-1 or TM 5-3800-205-10-2)
Materials/Parts
Scraper bowl or water tank lowered to ground (TM
5-3800-205-10-1 or TM 5-3800-205-10-2)
Cap set, protective (Item 5, WP 0171 00)
Oil, lubricating (Item 24, 27, 28 or 29, WP 0171
Parking brake applied (TM 5-3800-205-10-1 or TM
5-3800-205-10-2)
Rag, wiping (Item 31, WP 0171 00)
Wheels chocked (TM 5-3800-205-10-1 or TM 5-
Filter element, fluid
3800-205-10-2)
O-ring (3)
Battery disconnect switch in OFF position (TM 5-
3800-205-10-1 or TM 5-3800-205-10-2)
Seal
WARNING
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before disconnecting any
hydraulic lines. Failure to do so could result in injury.
Transmission fluid is very slippery. Immediately wipe up any spills. Failure to follow this warning may
result in injury to personnel.
NOTE
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance,
testing, adjusting and repair of the machine. Be prepared to collect fluid with suitable containers before
opening any compartment or disassembling any component containing fluids.
Cap all lines and openings to prevent fluid loss and contamination of transmission oil.
Dispose of all fluids according to local regulations and mandates.
