TM 5-3800-205-23-1
RADIATOR HOSES, TUBES, AND CLAMPS REPLACEMENT
THIS WORK PACKAGE COVERS
Upper Radiator Hose: Removal, Installation
Lower Radiator Hose: Removal, Installation
Overflow Hose: Removal, Installation
INITIAL SETUP
Maintenance Level
References
Unit
Equipment Condition
Tools and Special Tools
Front guard plate removed, if removing lower radi-
ator hose and overflow hose (WP 0100 00)
Tool kit, general mechanic's (Item 33, WP 0172
Coolant drained (WP 0010 00)
WARNING
DO NOT service cooling system unless engine has been allowed to cool down. This is a pressurized
cooling system and escaping steam or hot coolant will cause serious burns.
DO NOT remove cooling system radiator cap when engine is hot. Allow engine to cool down. Failure to
follow this warning may cause serious burns.
Wear effective eye, glove, and skin protection when handling coolants. Failure to do so may cause
injury.
NOTE
Care must be taken to ensure that fluids are contained during performance of inspections, maintenance,
testing, adjusting and repair of the machine. Be prepared to collect fluid with suitable container before
opening any compartment or disassembling any component containing fluids.
Dispose of all fluids in accordance with local mandates and regulations.
