TM 5-3800-205-23-1
FAN AND FAN DRIVE REPLACEMENT - CONTINUED
0031 00
REMOVAL - CONTINUED
9.
Remove two bolts (20) and governor assembly (19)
20
18
19
from fan drive (18).
390-109
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
10.
Attach link bracket, nylon sling, and suitable lifting
18
device to fan drive (18). Remove four bolts (21) and
fan drive from engine as a unit. Bolts are removed
from fan drive during repair procedure.
390-110
21
0031 00-3
