TM 5-3800-205-23-1
WATER PUMP REPLACEMENT - CONTINUED
0029 00
INSTALLATION
1.
Install two new O-rings and water pump on engine with four screws (12).
2.
Connect hose (10) to water pump and tighten hose clamp (11).
3.
Connect hose (9) to O-ring port tee and tighten retaining nut (8).
4.
Connect hoses (5 and 7) to aftercooler and water pump and tighten hose clamps (3 and 4). Tighten hose clamp (6).
5.
Install bracket (2) on water pump with four bolts (1).
1
2
6.
7.
8.
WARNING
If machine is parked indoors, DO NOT run engine unless exhaust fumes are vented to the outside. Failure to
follow this warning may cause injury or death due to carbon monoxide poisoning.
9.
Start engine (TM 5-3800-205-10-1 or TM 5-3800-205-10-2). Check for coolant leaks.
END OF WORK PACKAGE
0029 00-3