TM 5-3800-205-23-1
TURN SIGNAL/HAZARD FLASHER SWITCH REPLACEMENT - CONTINUED
0051 00
REMOVAL - CONTINUED
7,8
2
9
INSTALLATION
1.
If ground wire (2) was removed, install screw (7), washer (8), and ground wire on column (9).
2.
Route and connect switch leads (4) to harness connector (5).
3.
Install steering column rear upper cover (6).
4.
Position switch (3) on column (9).
5.
Install switch (3) and ground wire (2) with two screws (1).
1
2
3
END OF WORK PACKAGE
0051 00-3
