TM 5-3800-205-23-1
ENGINE TEMPERATURE AND ETHER START AID TEMPERATURE SWITCH
REPLACEMENT - CONTINUED
0063 00
REMOVAL
NOTE
Top switch is for engine temperature. Bottom switch is for ether start aid.
1.
Cut tiedown strap from wire bundle. Discard tiedown strap.
2.
Remove from clip (4) and disconnect switch connector (5) from harness connector (6).
3.
Hold switch (3) and loosen nut (2). Remove switch from thermostat housing (1).
ETHER START AID
TEMPERATURE SWITCH
1
2
3
4
6
5
INSTALLATION
1.
Position switch (3) in thermostat housing (1) and tighten nut (2).
2.
Install new tiestrap around wire bundle.
3.
Connect swtich connectors (5) to harness connector (6). Place connectors in clip (4).
4.
Fill cooling system (WP 0009 00 and WP 0010 00).
END OF WORK PACKAGE
0063 00-2
