TM 5-3800-205-23-1
ENGINE GRILLE, ACCESS DOOR, AND HOOD ASSEMBLY REPLACEMENT - CONTINUED
0099 00
INSTALLATION - CONTINUED
8.
Install two bolts (13), washers (14), and nuts (12) to
hood assembly mounting under left front of cab.
12,13,14
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Engine access door weighs 75 lb (34 kg).
9.
Fasten a suitable lifting device and link bracket to
7,8
6
engine access door (6) and lift access door into posi-
tion at hood assembly (5).
10.
Install four bolts (10) and washers (11) to hinges.
Install cotter pin (7) and washer (8) to control rod (9).
11.
Close and secure engine access door (6).
5
9
10,11
0099 00-8
