TM 5-3800-205-23-1
ENGINE GRILLE, ACCESS DOOR, AND HOOD ASSEMBLY REPLACEMENT - CONTINUED
0099 00
REMOVAL - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Hood assembly weighs 140 lb (64 kg).
12.
Fasten a suitable three-point lifting device and link
brackets to hood assembly (5). Carefully remove
hood assembly from machine.
5
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Hood assembly weighs 140 lb (64 kg).
1.
Fasten a suitable three-point lifting device and link brackets to hood assembly (5).
2.
Lift hood assembly (5) into position, aligning mounting bolt holes.
0099 00-5
