TM 5-3800-205-23-1
SEAT REPLACEMENT - CONTINUED
0103 00
REMOVAL
1.
Disconnect seat wiring harness connector (3) from cab wiring harness connector (2).
2.
Remove four nuts (5), eight washers (6), four bolts (7), and ground wire (4) from seat (1) and cab floor.
3.
Attach nylon sling to seat (1).
3
2
1
390-1411
4
5,6,7
NOTE
While one person in cab lifts upward on sling, two persons on ground lift and guide seat out of cab.
4.
Lift seat (1) and remove from machine.
5.
Remove nylon sling from seat (1).
INSTALLATION
1.
Attach nylon sling to seat (1).
NOTE
While one person in cab lifts upward on sling, two persons on ground lift and guide seat into cab.
2.
Lift seat (1) and position in machine.
3.
Install ground wire (4) and seat (1) on cab floor with four bolts (7), eight washers (6) and four nuts (5). Remove nylon
sling from seat.
4.
Connect seat wiring harness connector (3) to cab wiring harness connector (2).
END OF WORK PACKAGE
0103 00-2
