TM 5-3800-205-23-1
SEAT REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Equipment Condition
Maintenance Level
Machine parked on hard, level ground (TM 5-3800-
Unit
205-10-1 or TM 5-3800-205-10-2)
Scraper bowl or water tank lowered to ground (TM
Tools and Special Tools
5-3800-205-10-1 or TM 5-3800-205-10-2)
Tool kit, general mechanic's (Item 33, WP 0172
Parking brake applied (TM 5-3800-205-10-1 or TM
5-3800-205-10-2)
Sling, nylon (Item 27, WP 0172 00)
Wheels chocked (TM 5-3800-205-10-1 or TM 5-
3800-205-10-2)
Personnel Required
Battery disconnect switch in OFF position (TM 5-
3800-205-10-1 or TM 5-3800-205-10-2)
Three
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in injury to personnel.
NOTE
Seat weighs approximately 134 lb (61 kg).
