TM 5-3800-205-23-1
ENGINE REPLACEMENT - CONTINUED
0122 00
REMOVAL - CONTINUED
4.
Retrieve upper resilient mounts (12) from each side of front engine support (4) and from rear engine supports (10).
5.
Retrieve lower resilient mounts (14) and spacers (13) from frame.
6.
Inspect front and rear mount assemblies for damage or wear. If worn or damaged, obtain replacements.
10
12
12
4
13
13
14
14
390-2057
INSTALLATION
1.
Place four lower resilient mounts (14) and spacers (13) on frame.
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep
clear of heavy parts supported only by lifting device. Failure to follow this warning may result in death
or injury to personnel.
NOTE
Engine weighs 1,874 lb (850 kg).
2.
Attach load leveler (hoisting beam) and suitable lifting device to lifting plates (11). Carefully install engine in
machine.
NOTE
Nut (7) is used only on left-rear mount.
3.
Install upper resilient mounts (12) to each side of front engine support (4) and two rear engine supports (10).
4.
Position two upper resilient mounts (12) and install two bolts (5), four washers (6), and nuts (7) to secure rear
mount assemblies (9) on rear engine supports (10).
0122 00-3