TM 5-3800-205-23-1
ENGINE REPLACEMENT - CONTINUED
0122 00
INSTALLATION - CONTINUED
5.
Position two upper resilient mounts (12) and install
3
4
1,2
two bolts (1), washers (2) and large washers (3) to
secure front mount assemblies (5) on front engine
support (4).
6.
Tighten bolts (1 and 5) and nut (7) to 332 lb-ft (450
Nm).
7.
Connect universal joints (WP 0076 00).
8.
Connect air compressor (WP 0083 00).
9.
Connect steering hoses, lines, and fittings (WP 0153
5
5
10.
Connect engine oil sampling valve (WP 0015 00).
11.
Connect hydraulic lines and fittings (WP 0116 00).
12.
Connect fuel lines and hoses (WP 0020 00).
13.
Connect turbocharger (WP 0143 00).
14.
Connect air cleaner (WP 0018 00).
15.
Connect wiring harness (WP 0035 00).
16.
Connect shift control cables (WP 0069 00).
17.
Install hood assembly, engine access door, and grille (WP 0099 00).
18.
Install radiator (WP 0143 00).
19.
Connect battery cables (WP 0067 00).
20.
Connect starter cables (WP 0035 00)
21.
Check level of oil in crankcase and add as needed (WP 0009 00 and WP 0010 00).
WARNING
If machine is parked indoors, DO NOT run engine unless exhaust fumes are vented to the outside. Fail-
ure to follow this warning may cause injury or death due to carbon monoxide poisoning.
22.
Start engine (TM 5-3800-205-10-1 or TM 5-3800-205-10-2) and check for leaks and proper operation.
END OF WORK PACKAGE
0122 00-4
