TM 5-3800-205-23-1
STEERING HYDRAULIC CYLINDERS REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Maintenance Level
References
Direct Support
Tools and Special Tools
Tool kit, general mechanic's (Item 33, WP 0172
Equipment Condition
Machine parked on hard, level surface (TM 5-3800-
205-10-1 or TM 5-3800-205-10-2)
Materials/Parts
Scraper bowl or water tank lowered to ground (TM
5-3800-205-10-1 or TM 5-3800-205-10-2)
Parking brake applied (TM 5-3800-205-10-1 or TM
5-3800-205-10-2)
Wheels chocked (TM 5-3800-205-10-1 or TM 5-
3800-205-10-2)
Personnel Required
Battery disconnect switch in OFF position (TM 5-
Two
3800-205-10-1 or TM 5-3800-205-10-2)
WARNING
Do NOT disconnect or remove any hydraulic system line or fitting unless engine is shut down and
hydraulic system pressure has been relieved. Tighten all connections before applying pressure. Escap-
ing hydraulic fluid under pressure can penetrate the skin, causing serious injury.
At operating temperature hydraulic oil is hot. Allow hydraulic oil to cool before disconnecting any
hydraulics. Failure to do so could result in injury.
CAUTION
Cap hoses to prevent fluid loss and contamination of hydraulic system.
NOTE
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance,
testing, adjusting and repair of the machine. Be prepared to collect fluid with suitable containers before
opening any compartment or disassembling any component containing fluids.
Dispose of all fluids according to local regulations and mandates.
Tag hoses, wires to aid in installation.