TM 5-3800-205-23-1
STEERING HYDRAULIC CYLINDERS REPLACEMENT - CONTINUED
0153 00
REMOVAL
1.
Relieve hydraulic system pressure by moving steering
1
wheel in both directions.
2.
Disconnect hose (2) from steering cylinder (1).
2
3.
Remove nut (9), bolt (10), and washer (11). Separate
5
1
3,4
7
6
two clamps (8) to free up hose (7).
4.
Disconnect hose (7) from fitting at steering cylinder
(1).
8
5.
Attach nylon sling and suitable lifting device to steer-
ing cylinder (1) to support cylinder.
9,10,11
6.
Remove six bolts (3), washers (4), two plates (5), and
shaft (6) from steering cylinder (1).
8
0153 00-2
