TM 5-3800-205-23-1
TURBOCHARGER REPLACEMENT - CONTINUED
0143 00
REMOVAL - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Turbocharger weighs 40 lb (18 kg).
11.
Attach a nylon sling and suitable lifting device to tur-
24
25 (HIDDEN)
bocharger (3) for support.
12.
Remove four self-locking nuts (24) that secure turbo-
charger (3) to exhaust manifold (26). Remove turbo-
charger. Discard self-locking nuts.
13.
Remove and discard gasket (25) from exhaust mani-
fold (26).
3
26
INSTALLATION
1.
Attach a nylon sling and suitable lifting device to turbocharger (3).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Turbocharger weighs 40 lb (18 kg).
2.
Position turbocharger (3) and new gasket (25) to exhaust manifold (26).
3.
Install four new self-locking nuts (24) to secure turbocharger (3) to exhaust manifold (26). Tighten self-locking nuts to
40 lb-ft (54 Nm).
0143 00-4