TM 5-3800-205-23-1
AFTERCOOLER AND AIR INLET HEATER REPLACEMENT - CONTINUED
0142 00
INSTALLATION - CONTINUED
10.
Tighten hose clamp (4) on hose (5) and aftercooler (3).
2
4
5
3
1
11.
Tighten hose clamp (1) on hose (2) and aftercooler (3).
12.
Place battery disconnect switch in ON position (TM 5-3800-205-10-1 or TM 5-3800-205-10-2).
13.
Refill cooling system (WP 0009 00 and WP 0010 00).
WARNING
If machine is parked indoors, DO NOT run engine unless exhaust fumes are vented to the outside. Failure to
follow this warning may cause injury or death due to carbon monoxide poisoning.
14.
Start engine (TM 5-3800-205-10-1 or TM 5-3800-205-10-2). Check for leaks.
END OF WORK PACKAGE
0142 00-7
