TM 5-3800-205-23-1
AFTERCOOLER AND AIR INLET HEATER REPLACEMENT - CONTINUED
0142 00
REMOVAL - CONTINUED
5.
Remove nut (15) and disconnect cable assembly (17)
12
14
11
13
from air inlet heater (16). Remove nut (13) and dis-
connect ground strap (14) from air inlet heater. Loosen
nut (12) and disconnect hose (11).
15
16
17
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may result in injury to personnel.
NOTE
Aftercooler and air inlet heater assembly weigh 35 lb (16 kg).
6.
Remove 22 bolts (18) and washers (19) from after-
18,19
16
cooler (3), air inlet heater (16), and engine. Using a
nylon sling and suitable lifting device and hoist,
remove aftercooler and air inlet heater assembly from
engine.
7.
Separate air inlet heater (16) from aftercooler (3) and
remove gasket (20). Discard gasket.
20
3
0142 00-3
