TM 5-3800-205-23-1
TRANSMISSION/TRANSFER ASSEMBLY REPLACEMENT - CONTINUED
0147 00
REMOVAL - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Note position of transmission mount assemblies to aid in installation.
15.
Remove two nuts (31), washers (32), bolts (26), wash-
26,27
28
ers (27), and large washers (28). Lift transmission/
transfer assembly from frame (34) and remove. Place
on suitable cribbing or stand.
16.
Remove two mount assemblies (33), two mount
assemblies (30), and spacers. Inspect for wear or dam-
age and obtain replacements as needed.
17.
Remove four bolts, washers, and each mounting
bracket (29) from transmission/transfer assembly.
34
29
30
31,32
33
0147 00-6
