TM 5-3800-205-23-1
DRAFT FRAME, HITCH, AND TRACTOR FRAME PINS AND
0155 00
HITCH INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in injury or death to
personnel.
NOTE
Tractor hitch weighs 625 lb (284 kg).
1.
Attach lifting chains and nylon sling to hitch (25) to provide a three-point lift:
a.
Wrap a nylon sling through steering linkage openings at top of hitch.
b.
Install two links to hitch, one on each side, at bottom of hitch.
c.
Attach chains to links and secure chains and nylon sling to overhead lifting device. Take up all slack.
2.
Carefully lift hitch (25) and position hitch to machine.
3.
At lower-front of hitch (25), use soft-faced hammer to install pin (74) to hitch.
4.
Install retainer plate (73) to each end of pin (74) with three washers (72) and bolts (71).
25
74
73
71,72
0155 00-23