TM 5-3800-205-23-1
DRAFT FRAME, HITCH, AND TRACTOR FRAME PINS AND
BEARINGS REPLACEMENT - CONTINUED
0155 00
HITCH INSTALLATION - CONTINUED
5.
At lower-rear of hitch (25), use soft-faced hammer to install pin (68) to hitch.
6.
Install washer (70) and nut (69) to pin (68). Tighten nut to 693-753 lb-ft (940-1020 Nm).
25
68
69
70
7.
Remove chains, links, and nylon sling from hitch (25).
8.
At left side of hitch (25), install five tube (66) assemblies with two retainers (62) and nine washers (64) and bolts (63).
NOTE
New O-rings used at hydraulic connections should be lightly coated with oil before installation.
9.
Install five new O-rings (67) and five hydraulic hoses (65) to tubes (66).
0155 00-24
