TM 5-3800-205-23-1
STEERING LINK REPLACEMENT - CONTINUED
0156 00
INSTALLATION - CONTINUED
NOTE
Ensure same quantity and thickness of shims are installed as were removed, and in the same location.
4.
Attach nylon sling and suitable lifting device to steering link (1). With assistance, position steering link and shims (12)
on machine.
5.
Use a soft faced hammer to install shaft (11) on steering link (1). Remove lifting device from steering link.
6.
Position steering cylinder (9) and shims (10). Install shaft (8) on steering links (1 and 7) and steering cylinder. Remove
lifting device from cylinder.
7
1
11
1
9
8
12
10
7.
Install three plates (6), nine bolts (3), washers (4), and three grease fittings (5) on steering links (1 and 7).
8.
Install two grease fittings (2) to underside of the steering link (1).
.
5
1
3,4
7
1
6
2
9.
Lubricate steering links with GAA grease (TM 5-3800-205-10-1 or TM 5-3800-205-10-2).
END OF WORK PACKAGE
0156 00-4
