TM 5-3800-205-23-1
ELEVATOR/WATER HYDRAULIC PUMP REPLACEMENT - CONTINUED
0159 00
REMOVAL - CONTINUED
5.
Loosen four hose clamps (11) and slide hose (7) from
tube (10).
10
7
11
6.
Remove four bolts (12), washers, and two half flanges
(15) from pump (4).
12
5
13,14
7.
Remove hose (13) and O-ring (14) from pump (5).
Discard O-ring.
15
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in injury or death to
personnel.
NOTE
Elevator pump weighs 77 lb (35 kg).
0159 00-3
