TM 5-3800-205-23-2
FUEL PUMP, HOSES, AND TUBES REPLACEMENT - CONTINUED
0001 00
FUEL PUMP REPLACEMENT
CAUTION
Use two wrench method when disconnecting fuel hose and tube from fuel pump. Failure to follow this cau-
tion may result in damage to ceramic adapter.
1.
Disconnect hose (6) and tube (2) from fuel pump (5). Remove and discard O-rings.
NOTE
Tag wires to aid in installation.
2.
Remove two nuts (3), lockwashers (4), and wires (1)
from fuel pump (5). Discard lockwashers.
1
2
3,4
5
390-1294
6
NOTE
Note position of fuel pump to aid in installation.
3.
Remove screw (8), washer (9), clamp (7), and fuel pump (5) from rear of machine.
4.
Remove and inspect fittings from fuel pump (5). Replace fittings if damaged.
5.
Lubricate new O-rings with clean fuel and install on fuel pump (5).
6.
Install two wires (1) on fuel pump (5) with two new lockwashers (4) and nuts (3).
0001 00-2
