TM 5-3800-205-23-2
FUEL/WATER SEPARATOR REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Maintenance Level
Equipment Condition
Machine parked on hard, level surface (TM 5-3800-
Unit
205-10-1)
Tools and Special Tools
Scraper bowl lowered to ground (TM 5-3800-205-
Tool kit, general mechanic's (Item 33, WP 0048 00)
10-1)
Shop equipment, common no. 1 (Item 24, WP 0048
Parking brake applied (TM 5-3800-205-10-1)
Wheel chocked (TM 5-3800-205-10-1)
Materials/Parts
Battery disconnect switch in OFF position (TM 5-
3800-205-10-1)
Cap set, protective (Item 5, WP 0047 00)
Rear compartment access door opened (TM 5-
Fuel (Item 13, 14 or 15, WP 0047 00)
3800-205-10-1)
Rag, wiping (Item 31, WP 0047 00)
Fuel shutoff valves closed (TM 5-3800-205-10-1)
Filter element, fluid
Fuel/water separator drained (TM 5-3800-205-10-
1)
O-ring (6)
WARNING
DO NOT perform fuel system checks, inspections or maintenance while smoking or near fire, flames or
sparks. Clean up all leaked or spilled fuel. Fuel may ignite, causing damage to machine and injury or death
to personnel.
CAUTION
Cap all hoses and fittings to prevent fluid loss and contmination of fuel system.
NOTE
Care must be taken to ensure that fluids are contained during performance of inspection, main-
tenance, testing, adjusting and repair of the machine. Be prepared to collect fluid with suitable
containers before opening any compartment or disassembling any component containing flu-
ids.
Dispose of all fluids according to local regulations and mandates.
