TM 5-3800-205-23-2
GROUND STRAPS REPLACEMENT - CONTINUED
0004 00
STARTER GROUND CABLE REPLACEMENT
1.
Place battery disconnect switch in OFF position (TM 5-3800-205-10-1).
2.
Open engine access door (TM 5-3800-205-10-1).
3.
Remove screw (7), washer (8), and ground cable (9) from ground lug (10).
4.
Remove nut (11), lockwasher (12), and other end of ground cable (9) from starter terminal (13). Discard lockwasher.
NOTE
Ensure ground points are clean and free of paint.
5.
Install ground cable (9) on starter terminal (13) with new lockwasher (12) and nut (11).
6.
Install other end of ground cable (9) on ground lug (10) with washer (8) and screw (7).
7.
Close engine access door (TM 5-3800-205-10-1).
7,8,9,10
390-1870
9,11,12,13
0004 00-2
