TM 5-3800-205-23-2
FUEL LEVEL SENDING UNIT AND DIAL SENSOR REPLACEMENT - CONTINUED
0007 00
DIAL SENSOR REMOVAL - CONTINUED
NOTE
Ensure area around dial sensor is clear of dirt and debris.
2.
Disconnect dial sensor connector (6) from wiring harness connector (7).
3.
Remove two screws (5) and dial sensor (8) from fuel level sending unit (4).
DIAL SENSOR INSTALLATION
1.
Install dial sensor (8) on fuel level sending unit (4) with two screws (5).
2.
Connect dial sensor connector (6) to wiring harness connector (7).
3.
Install cover (3) on machine with six screws (1) and washers (2).
5
4
1,2
1,2
6
7
390-1291
3
8
390-1290
0007 00-2