TM 5-3800-205-23-2
REAR HUB AND DISC REPLACEMENT - CONTINUED
0009 00
REMOVAL - CONTINUED
3.
Remove locknut (5) from axle shaft (6).
3
7,8
9
5
390-553
390-554
6
6
4.
Remove tab lockwasher (7) from axle shaft (6).
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable lift capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Hub weighs 250 lb (113 kg).
5.
Attach bearing link, two nylon slings, and a suitable
3
lifting device to hub (3).
6.
Remove locknut (8) and outer roller bearing (9) from
axle shaft (6).
7.
Remove six bolts (11) and plate (10) from hub (3).
390-556
11
10
0009 00-2
