TM 5-3800-205-23-2
AIR/HYDRAULIC BRAKE CYLINDER REPLACEMENT - CONTINUED
0010 00
REMOVAL
CAUTION
Always use two wrenches on fittings when removing brake lines. Failure to do so may damage fittings.
1.
Loosen nut (2) and disconnect tube (1) from air/hydraulic brake cylinder (3). Install protective cap on tube.
390-585
3
1
2
2.
Remove two screws (4), washers (5), and electrical
6
4,5
leads (6) from air/hydraulic brake cylinder (3).
3.
Disconnect vent tube (7) from air/hydraulic brake cyl-
inder (3).
390-586
7
3
0010 00-2
