TM 5-3800-205-23-2
AIR/HYDRAULIC BRAKE CYLINDER REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Maintenance Level
References
Unit
Tools and Special Tools
Equipment Condition
Tool kit, general mechanic's (Item 33, WP 0048 00)
Air tube disconnected from quick release valve
Shop equipment, common no. 1 (Item 24, WP 0048
Machine parked on hard, level surface (TM 5-3800-
205-10-1)
Materials/Parts
Scraper bowl lowered to ground (TM 5-3800-205-
Cap set, protective (Item 5, WP 0047 00)
10-1)
Tag, marker (Item 39, WP 0047 00)
Parking brake applied (TM 5-3800-205-10-1)
Tape, antiseizing (Item 40, WP 0047 00)
Wheels chocked (TM 5-3800-205-10-1)
Personnel Required
Battery disconnect switch in OFF position (TM 5-
Two
3800-205-10-1)
WARNING
Do NOT disconnect any air system lines or fittings unless engine is shut down and air system
pressure is relieved. Failure to follow this warning could result in serious injury to personnel.
Always wear eye protection when disconnecting air lines. Residual air will be expelled. Failure
to follow this warning may result in serious eye injury.
CAUTION
Cap all tubes to prevent fluid loss and contamination of brake fluid.
NOTE
Tag all tubes to aid in installation.
Care must be taken to ensure that fluids are contained during performance of inspection, main-
tenance, testing, adjusting and repair of the machine. Be prepared to collect fluid with suitable
containers before opening any compartment or disassembling any component containing flu-
ids.
Dispose of all fluids according to local regulations and mandates.
