TM 5-3800-205-23-2
AIR/HYDRAULIC BRAKE CYLINDER REPLACEMENT - CONTINUED
0010 00
INSTALLATION - CONTINUED
4.
Position tube (8) on air/hydraulic brake cylinder (3) and tighten nut (9).
390-587
8
9
3
5.
Install two electrical leads (6) on air/hydraulic brake
6
4,5
cylinder (3) with two washers (5) and screws (4).
6.
Position tube (1) on air/hydraulic brake cylinder (3)
and tighten nut (2).
390-586
7
3
7.
Connect air tube to quick-release valve (WP 0013 00).
8.
Fill brake fluid reservoir (Refer to Unit PMCS in TM 5-3800-205-23-1).
9.
Bleed brake system (WP 0014 00).
0010 00-5
