TM 5-3800-205-23-2
BRAKE LINES REPLACEMENT
THIS WORK PACKAGE COVERS
Tube Assemblies: Removal, Installation
Caliper Brake Hose Assembly: Removal, Installation
INITIAL SETUP
References
Maintenance Level
Unit
Personnel Required
Tools and Special Tools
Two
Tool kit, general mechanic's (Item 33, WP 0048 00)
Shop equipment, common no. 1 (Item 24, WP 0048
Equipment Condition
Rear tires and rims removed (WP 0016 00)
Materials/Parts
Cap set, protective (Item 5, WP 0047 00)
Rag, wiping (Item 31, WP 0047 00)
Tag, marker (Item 39, WP 0047 00)
TUBE ASSEMBLIES REMOVAL
CAUTION
Always use two wrenches on fittings when removing brake lines. Failure to do so may damage fittings.
Cap all lines to prevent fluid loss and contamination of brake system.
NOTE
Tag all lines to aid in installation.
Care must be taken to ensure that fluids are contained during maintenance of machine. Be prepared to
collect fluid with suitable containers before opening any component or disassembling any component
containing fluids. Ensure all spills are cleaned up.
Dispose of all fluids according to local regulations and mandates.
