TM 5-3800-205-23-2
BRAKE LINES REPLACEMENT - CONTINUED
0014 00
BRAKE CALIPER HOSE ASSEMBLY REMOVAL - CONTINUED
2.
Loosen nut (16) from adapter at caliper (17) and remove hose assembly (15).
15
17
16
BRAKE CALIPER HOSE ASSEMBLY INSTALLATION
CAUTION
Always use two wrenches on fittings when installing brake lines. Failure to do so may damage fittings.
Care must be taken to ensure fitting nuts are not cross-threaded during installation.
1.
Connect hose assembly (15) to adapter at caliper (17) and tighten nut (16).
2.
Connect hose assembly (15) to elbow (12) and tighten nut (14).
0014 00-4
