TM 5-3800-205-23-2
REAR TIRE AND RIM REPLACEMENT - CONTINUED
0016 00
REMOVAL - CONTINUED
2.
Position floor jack under scraper frame at jacking point.
3.
Raise rear of scraper and position two stands at support points.
390-1387
JACKING
SUPPORT
SUPPORT
POINT
POINT
POINT
NOTE
Sixteen nuts are used to secure tire to scraper. Remove only 14 at this time.
4.
Remove 14 nuts (1) and washers (2) from rim (3).
Leave two nuts on rim to hold tire (4) in place.
3
1,2
4
0016 00-2
