TM 5-3800-205-23-2
TOOLBOX AND REAR DECK COVER REPLACEMENT - CONTINUED
0017 00
REAR DECK COVER REMOVAL
5
1.
Remove toolbox (5) (Refer to Toolbox Removal).
2.
Remove two bolts (11) and elevator motor stowage
cup (12) from cover (4).
3.
Open latch (13) on access door (14).
WARNING
Use extreme caution when handling heavy
parts. Provide adequate support and use
assistance during procedure. Failure to fol-
390-2064
low this warning may result in injury to
4
personnel.
9,10
9,10
11
12
13
14
4.
Remove four bolts (9), washers (10), and cover (4)
from machine.
REAR DECK COVER INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may result in injury to personnel.
1.
Install cover (4) on machine with four washers (10) and bolts (9).
2.
Close latch (13) on access door (14).
3.
Install elevator motor stowage cup (12) on cover (4) with two bolts (11).
4.
Install toolbox (5) (Refer to Toolbox Installation).
END OF WORK PACKAGE
0017 00-3