TM 5-3800-205-23-2
TOOLBOX AND REAR DECK COVER REPLACEMENT - CONTINUED
0017 00
TOOLBOX REMOVAL - CONTINUED
WARNING
Use extreme caution when removing toolbox lid holdback brace. Use assistance to support lid during proce-
dure. Failure to do so may result in injury.
NOTE
Perform step 3 only if toolbox lid holdback brace is damaged.
3.
Remove four nuts (7), screws (8), and toolbox lid holdback brace (6) from toolbox (5) and toolbox lid (1).
TOOLBOX INSTALLATION
WARNING
Use extreme caution when installing toolbox lid holdback brace. Use assistance to support lid during proce-
dure. Failure to do so may result in injury.
1.
If removed, install toolbox lid holdback brace (6) on toolbox (5) and toolbox lid (1) with four screws (8) and nuts (7).
2.
Install toolbox (5) on rear deck cover (4) with six washers (3) and screws (2).
3.
Close toolbox lid (1).
1
1
2,3
4
6
7,8
5
5
390-1815
390-1546
0017 00-2