TM 5-3800-205-23-2
ELEVATOR MOTOR REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
References
Maintenance Level
Unit
TM 5-3800-205-23-1
Tools and Special Tools
Equipment Condition
Tool kit, general mechanic's (Item 33, WP 0048 00)
Machine parked on hard, level surface (TM 5-3800-
Sling, nylon (Item 27, WP 0048 00)
205-10-1)
Materials/Parts
Scraper bowl lowered to ground (TM 5-3800-205-10-
1)
Cap set, protective (Item 5, WP 0047 00)
Rag, wiping (Item 31, WP 0047 00)
Parking brake applied (TM 5-3800-205-10-1)
Tag, marker (Item 39, WP 0047 00)
Wheels chocked (TM 5-3800-205-10-1)
Personnel Required
Battery disconnect switch in OFF position (TM 5-
Two
3800-205-10-1)
WARNING
At operating temperature hydraulic oil is hot. Allow hydraulic oil to cool before disconnecting
any hydraulic lines. Failure to do so could result in injury.
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
CAUTION
Cap hoses to prevent fluid loss and contamination of fuel system.
NOTE
Tag hoses to aid in installation.
Care must be taken to ensure that fluids are contained during performance of inspection, main-
tenance, testing, adjusting and repair of the machine. Be prepared to collect fluid with suitable
containers before opening any compartment or disassembling any component containing flu-
ids.
Dispose of all fluids according to local regulations and mandates.
