TM 5-3800-205-23-2
HYDRAULIC LINES AND FITTINGS REPLACEMENT
THIS WORK PACKAGE COVERS
Quick Disconnect Coupling: Removal, Installation
Hydraulic Hose: Removal, Installation
Hydraulic Tube: Removal, Installation
INITIAL SETUP
Maintenance Level
Materials/Parts - Continued
Unit
Rag, wiping (Item 31, WP 0047 00)
Tag, marker (Item 39, WP 0047 00)
Tools and Special Tools
O-ring (as required)
Tool kit, general mechanic's (Item 33, WP 0048 00)
Shop equipment, common no. 1 (Item 24, WP 0048
References
Materials/Parts
Equipment Condition
Cap set, protective (Item 5, WP 0047 00)
Hydraulic tank drained (all except quick disconnect
hoses) (TM 5-3800-205-23-1, WP 0010 00)
Oil, lubricating (Item 24 or 29, WP 0047 00)
WARNING
DO NOT disconnect or remove any hydraulic system line or fitting unless engine is shut down
and hydraulic system pressure has been relieved. Tighten all connections before applying pres-
sure. Escaping hydraulic fluid under pressure can penetrate the skin, causing serious injury.
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before disconnecting
any hydraulic lines. Failure to do so could result in injury.
Hydraulic fluid is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
CAUTION
Wipe area clean around all hydraulic connections prior to disconnecting. Cap all openings after disconnect-
ing. Contamination of hydraulic system could result in equipment failure.
NOTE
Tag hydraulic lines to aid in installation.
