TM 5-3800-205-23-2
HYDRAULIC LINES AND FITTINGS REPLACEMENT - CONTINUED
0020 00
HYDRAULIC TUBE REMOVAL
CAUTION
Use two wrench method when disconnecting non-quick disconnect connections to prevent damage to fit-
tings.
NOTE
Hydraulic system uses several different style clamps. A four-bolt clamp is shown.
1.
Disconnect hose (10) from tube (11). Remove O-ring (11) and discard. Install protective caps on hose and tube.
2.
Remove four bolts (13) from front half of clamp (14).
3.
Repeat steps 1 and 2 to remove the other end of tube (11). Remove tube from machine.
11,12
10
390-1495
13
14
0020 00-5
