TM 5-3800-205-23-2
HYDRAULIC LINES AND FITTINGS REPLACEMENT - CONTINUED
0020 00
QUICK DISCONNECT COUPLING REMOVAL
1.
Relieve hydraulic system pressure (to facilitate disconnection and connection of quick disconnect connectors) by mov-
ing control levers through all positions (TM 5-3800-205-10-1).
2.
Turn coupling (2) until small indentation (3) is aligned with pin (4).
3.
Pull down on coupling (2) and disconnect from coupling (1).
4
3
12
390-1490
QUICK DISCONNECT COUPLING INSTALLATION
1.
Align small indentation (3) on coupler (2) with pin (4).
2.
Pull down on coupling (2) and connect to coupling (1) until it clicks into position.
3.
Turn coupling (2) so that small indentation (3) is not aligned with pin (4).
0020 00-2
