TM 5-3800-205-23-2
SERVICE BRAKES BLEEDING - CONTINUED
0015 00
BLEEDING - CONTINUED
NOTE
Care must be taken to ensure that fluids are contained during maintenance of machine. Be pre-
pared to collect fluid with suitable containers before opening any component or disassembling
any component containing fluids.
Dispose of all fluids according to local regulations and mandates.
3.
Attach clear hose to bleed screw (2) on air/hydraulic
2
brake cylinder (3).
4.
Open bleed screw (2) to allow fluid flow. Close bleed
screw when bubble-free fluid flow is observed.
Remove hose from bleed screw.
390-588
3
NOTE
4
5
Wheel brake calipers have two bleed
screws per caliper. When bleeding caliper,
do one bleed screw at a time.
5.
Install clean hose on one bleed screw (4) at caliper (5).
4
Open bleed screw to allow fluid flow. Close bleed
screw when bubble-free fluid flow is observed.
Remove hose.
6.
Repeat step 5 for other bleed screw (4) on caliper (5).
7.
Disconnect power bleed unit.
8.
Ensure brake fluid reservoir is full before installing
cover.
9.
Close rear access cover (TM 5-3800-205-10-1).
390-1758
END OF WORK PACKAGE
0015 00-2
