TM 5-3800-205-23-2
BRAKE LINES REPLACEMENT - CONTINUED
0014 00
TUBE ASSEMBLIES INSTALLATION - CONTINUED
3.
Connect tube assembly (1) to elbow (12) and tighten nut (11).
4.
Connect tube assembly (1) to tee fitting (3) and tighten nut (2).
5.
Connect tube assembly (7) to tee fitting (3) and tighten nut (4).
6.
Connect tube assembly (7) to air/hydraulic brake cylinder (5) and tighten nut (6).
7.
Bleed brake system (WP 0015 00).
8.
Install rear tires and rims (WP 0016 00).
BRAKE CALIPER HOSE ASSEMBLY REMOVAL
CAUTION
Always use two wrenches on fittings when removing brake lines. Failure to do so may damage fittings.
Cap all lines to prevent fluid loss and contamination of brake system.
NOTE
Tag all lines to aid in installation.
Care must be taken to ensure that fluids are contained during maintenance of machine. Be prepared to
collect fluid with suitable containers before opening any component or disassembling any component
containing fluids. Ensure all spills are cleaned up.
Dispose of all fluids according to local regulations and mandates.
1.
Loosen nut (14) and disconnect hose assembly (15) from elbow (12).
12
14
15
0014 00-3
