TM 5-3800-205-23-2
QUICK-RELEASE VALVE REPLACEMENT - CONTINUED
0013 00
REMOVAL
1.
Disconnect tube (1) from adapter (2).
2.
Remove adapter (2), quick-release valve (3), and adapter (4) from air/hydraulic brake cylinder (5).
1
2
3
5
4
390-1608
INSTALLATION
NOTE
Remove old antiseizing tape and apply new antiseizing tape to male threads of all fittings before connections
are made.
1.
Install adapter (4) and quick-release valve (3) on air/hydraulic brake cylinder (5).
2.
Install adapter (2) on quick-release valve (3) and connect tube (1).
WARNING
If machine is parked indoors, DO NOT run engine unless exhaust fumes are vented to the outside. Failure to
follow this warning may cause injury or death due to carbon monoxide poisoning.
3.
Start engine and fully charge air system (TM 5-3800-205-10-1).
4.
Check for air leaks.
5.
Close rear compartment access door (TM 5-3800-205-10-1).
END OF WORK PACKAGE
0013 00-2
