TM 5-3800-205-23-2
AIR HOSE AND TUBES REPLACEMENT - CONTINUED
0012 00
AIR HOSE REMOVAL
1.
At right-front of scraper, disconnect hose (1) from
connector (2). Remove and discard O-ring.
1
2
390-1604
NOTE
Cut tiedown straps as required to remove hose from machine.
2.
Remove screw (5), washer (6), hose clamp (7), and buckle-type straps (3), as required, to separate hose (1) from
machine.
3.
Disconnect other end of hose (1) from tube (4).
4.
Remove hose (1) from machine.
NOTE
Remove old antiseizing tape and apply new antiseizing tape to male threads of all fittings before connections
are made.
1.
Position hose (1) on machine.
2.
Connect hose (1) to tube (4).
3.
Install new O-ring on other end of hose (1) and connect hose to connector (2).
0012 00-2