TM 5-3800-205-23-2
AIR HOSE AND TUBES REPLACEMENT
THIS WORK PACKAGE COVERS
Air Hose: Removal, Installation
Air Tube: Removal, Installation
INITIAL SETUP
Equipment Condition
Maintenance Level
Machine parked on hard, level surface (TM 5-3800-
Unit
205-10-1)
Scraper bowl lowered to ground (TM 5-3800-205-
Tools and Special Tools
10-1)
Ejector in forward position (TM 3800-205-10-1)
Parking brake applied (TM 5-3800-205-10-1)
Materials/Parts
Wheels chocked (TM 5-3800-205-10-1)
Battery disconnect switch in OFF position (TM 5-
3800-205-10-1)
Air tanks drained (TM 5-3800-205-10-1)
Toolbox and rear deck cover removed, if required
O-ring (as required)
WARNING
Do NOT disconnect any air system lines or fittings unless engine is shut down and air system
pressure is relieved. Failure to follow this warning could result in serious injury to personnel.
Always wear eye protection when disconnecting air lines. Residual air will be expelled. Failure
to follow this warning may result in serious eye injury.