TM 5-3805-248-14&P-1
6.
8.
Push the accelerator pedal to just
If the engine oil pressure gauge
past ENGINE STOPPED detent.
doesn't register within 10 seconds, stop the
engine by pulling up on the accelerator
pedal. Have corrections made.
9.
Keep the engine at low idle until the
systems are warm.
10. Watch all gauges and indicators.
They must have correct readings before
moving the machine.
7.
Push in and turn the start switch to
START. Release the switch when the engine
starts.
CAUTION
After every 30 seconds of cranking, allow 2
minutes for the starting motor to cool.
31
