TM 5-3805-248-23-1
BLACKOUT DRIVE LIGHT ASSEMBLY REPLACEMENT- CONTINUED
0082 00
BLACKOUT DRIVE LIGHT INSTALLATION
1.
Install lamp (11) in blackout drive light (2).
2.
Install preformed packing (10) and new gasket (8).
3.
Install door assembly (1).
4.
Install three screws (9).
5.
Verify correct operation of blackout drive light (TM 5-3805-248-10).
BLACKOUT DRIVE LIGHT ASSEMBLY REMOVAL
1.
Disconnect wiring harness (3) from rear of blackout drive light (2).
2.
Remove nut (4) and lockwasher (5). Discard lockwasher.
3.
Remove blackout drive light (2).
4.
Remove washer (7) and lockwasher (6). Discard lockwasher.
BLACKOUT DRIVE LIGHT ASSEMBLY INSTALLATION
1.
Install new lockwasher (6) and washer (7).
2.
Install blackout drive light (2).
3.
Install new lockwasher (5) and nut (4).
4.
connect wiring harness (3) to rear of blackout drive light (2).
5.
Verify correct operation of blackout drive light (TM 5-3805-248-10).
END OF WORK PACKAGE
0082 00-3/(-4 blank)
