TM 5-3805-248-23-1
TURN SIGNAL AND HAZARD WARNING SWITCH REPLACEMENT - CONTINUED
0080 00
INSTALLATION
NOTE
If holder was removed, perform steps 1 and 2. Otherwise, skip to step 3.
1.
Route wiring harness (8) through holder (5) and posi-
1
2
tion holder on mounting bracket.
2.
Install three washers (7) and bolts (6).
3.
Connect five wire connectors (4) to switch (3).
3
4.
Install switch (3).
5.
Install three new lockwashers (2) and screws (1).
4
5
6
7
8
MOUNTING
394-219
BRACKET
END OF WORK PACKAGE
0080 00-2
