TM 5-3805-248-23-1
WORKLIGHT, HIGH BEAM, LOW BEAM AND BACKUP ALARM/HORN
RELAYS REPLACEMENT
HIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Maintenance Level
Materials/Parts
Unit
Tools and Special Tools
Equipment Condition
Tool kit, general mechanic's (Item 113, WP 0338
REMOVAL
WARNING
Turn battery disconnect to OFF position before working on any electrical system component. Failure to fol-
low this warning may result in injury or damage to equipment.
NOTE
The following maintenance procedure is for the worklight relay. The maintenance procedure for the
high beam, low beam and backup alarm/horn relays are identical.
Tag all wire connectors, cables and wiring harnesses prior to removal to ensure correct installation.
1.
Disconnect four wire connectors (1) from relay (4).
2.
Remove two bolts (2) and washers (3).
3.
Remove relay (4).
HIGH BEAM
LOW BEAM
2,3
1
RELAY
RELAY
4
BACKUP ALARM HORN RELAY
WORKLIGHT RELAY