TM 5-3805-248-23-1
TURN SIGNAL AND HAZARD WARNING SWITCH REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Materials/Parts
Maintenance Level
Rag, wiping (Item 35, WP 0339 00)
Unit
Tag, marker (Item 42, WP 0339 00)
Tools and Special Tools
Lockwasher (3)
Tool kit, general mechanic's (Item 113, WP 0338
Equipment Condition
Battery disconnect switch in OFF position (TM 5-
3805-248-10)
REMOVAL
WARNING
Turn battery disconnect to OFF position before working on any electrical system component. Failure to fol-
low this warning may result in injury or damage to equipment.
1
1.
Remove three screws (1) and lockwashers (2) from
2
switch (3). Discard lockwashers.
2.
Pull switch (3) out of holder (5).
3
NOTE
Tag all wire connectors, cables and wiring
4
harnesses prior to removal to ensure cor-
rect installation.
3.
Disconnect five wire connectors (4).
5
4.
If necessary, remove three bolts (6), washers (7) and
holder (5) from mounting bracket and slide wiring
harness (8) out of holder.
6
7
8
MOUNTING
394-219
BRACKET
